Share this content on Facebook!
09 Dec 2015

In understanding how to make guitars and guitar-type instruments, you only need to grasp a few basic facts. Taking a look at things simply at first, how to make a guitar all can be logically understood by dissecting the instrument into three major parts; you will find the body, which can be hollow, or solid regarding an electric guitar; you have the neck, which both holds the strings taught and also provides a place for fingers to press the strings against (at different places, effectively shortening the size of the vibrations thereof, to varying degrees), for creating different notes; there are also the strings themselves. Let us take a closer look at the first two...- Jadakiss Type Beat 2016

Before we get into the math involved with fret placement, if you are after to know how to make guitar necks including those we see on guitars in instrument shops, particularly with those electric types designed to use steel strings, you'll invariably need to route a channel (usually beneath the fret board, before attaching it) centrally down the length of it for the truss rod to be kept in place. A truss rod can be used to correct any natural bowing that could occur in the wood from the neck, or that may also be due to the stresses of stretching steel strings upon it, by adjusting the stress thereof.

Understanding how to make a neck of the guitar for acoustic types the ones using nylon or another material for strings, find that this may not be necessary. Creating a slight arc to the fret board through the cross section of the neck could be desired, based on the player's specific needs - using this type of aspect of how to make guitar necks, visitors these can be of different radii, for example with the Gibson type guitar fret boards, which can be of a 12" radius arc.

Making guitar fret placements down the length of the neck become known has a wee bit of math - a bit trick known as the "18 rule". The 18 rule is often a means of finding precisely where you should place each fret for the fret board, and is a must-have bit of information, should you really want to know how to make a guitar. It goes similar to this; you measure the distance of the "effective length" of the string... frankly, the part of the string that lies freely between your "nut" at the head stock end from the neck (also called the "zero fret"), and the "bridge" at the body end in the strings.

You then take this measurement and divide by 18 - or considerably more precisely, 17.8167942... take the answer to that math problem, and you have the precise distance in the nut to place the initial fret. Now measure from that unprecedented first fret placement and the bridge, divide that by 17.8167942, and you then have precisely where you should put the next fret, etc. The number 17.8167942 is pretty close to 18, thus the rule.

There are other factors to learn how to make guitar type instruments, but none of them that are quite as mathematically involved as finding fret placements a great deal. Now that you know the 18 rule, you may have the hardest mathematical part with you. So as you can see, finding out how to make a guitar and putting one together needn't be very difficult. The rest is a matter of how well at your job your hands and what tools you've got at your disposal. With strings, fret wire, machine heads and wood clamps and so forth, readily available and easily enough bought, it's all easy enough to put together when you are aware how.- Jadakiss Type Beat 2016


Comments

There isn't any comment in this page yet!

Do you want to be the first commenter?


New Comment

Full Name:
E-Mail Address:
Your website (if exists):
Your Comment:
Security code: